A failed packaging compliance result is a finding, not a catastrophe, provided the buyer runs a disciplined retest workflow. The short version: contain the affected lot first, find the root cause second, agree the corrective action in writing third, and retest the corrected goods before anyone talks about shipping. This fourth instalment in the series focuses on the retest stage itself, where most teams either rush and repeat the failure or stall and miss the season.
Key takeawaysQuarantine the affected lot physically and in the shipping plan before investigating, so suspect goods cannot mix with good stock. · Separate material failures from marking and documentation failures, because each points to a different owner and a different fix. · Use restricted-substance discipline for any chemical failure: identify the offending material layer and its supplier before retesting anything [1]. · Treat marking and declaration gaps with conformity-marking discipline, confirming each required element is present, legible, and durable [2]. · Close the loop with a retest whose scope, sampling, and pass criteria are agreed in writing before the lab starts.
Earlier parts of this series covered containing suspect goods, classifying the failure, and negotiating corrective action with the factory. This part picks up at the point where the factory claims the fix is done and asks for a second chance. Granting it without structure is how buyers pay for the same test twice and get the same failure twice.
Retest failures usually come from three shortcuts: retesting too narrowly so the real defect escapes, retesting too early before the corrective action reaches the whole lot, or retesting without written criteria so the new verdict cannot be compared with the old one. Each shortcut is avoidable with modest planning.
This article lays out the retest workflow step by step, explains how chemical and marking failures need different handling, and shows what a closed failure file looks like when the customer or the authorities ask questions later.
Hold the line before the retest starts
Nothing should ship from the affected lot until the retest verdict lands. That means a physical hold with labels and segregation in the warehouse, plus a planning hold that removes the lot from the shipping schedule. Factories under delivery pressure will ask to split-ship the apparently good pallets, and buyers should refuse unless the good portion can be positively identified and separately verified.
The hold also protects the investigation. When suspect and corrected goods mix, nobody can say afterwards which result belongs to which goods, and the whole retest exercise becomes theatre. Photograph the segregated stock, record carton counts, and share the hold note with the freight forwarder so no container gets loaded by habit.
Set the communication rule early: the factory reports progress against the agreed corrective action, and the buyer authorises each next step in writing. Verbal assurances that everything is fixed now are the leading indicator of a second failure.
Diagnose before you correct
Chemical failures versus marking failures
| Failure family | Typical root cause | What the retest must include |
|---|---|---|
| Restricted substance over limit | Substituted ink, adhesive, or coating from a new sub-supplier | Retest of every affected material layer from bulk-lot samples, with supplier declarations for the replacement |
| Heavy metal in printed areas | Unverified ink system or contaminated recycled content | Layer-by-layer retest plus ink change records and incoming-material checks |
| Missing required marking | Artwork never updated or plates cut from an old file | Full marking review of corrected cartons against the current artwork approval |
| Illegible or non-durable marking | Wrong printing process or untested label stock | Legibility and durability checks on production-run cartons, not proofs |
| Wrong or incomplete declaration | Copy-paste documentation from a different product | Document review tied to the corrected lot, with version control on the declaration file |
| Mixed failures across components | Several small substitutions accumulating into one failed verdict | Widened scope covering all sibling components and materials, not only the failed line |
Running the retest itself
Draw retest samples from the corrected bulk lot, using the same sampling discipline as the first round so the two verdicts are comparable. Samples prepared specially by the factory prove the process can work, which was never the question; the question is whether the bulk lot now conforms. Witnessed or inspector-drawn sampling answers it far more convincingly than couriered samples.
For chemical failures, keep the discipline that restricted-substance regimes demand: test the offending layer, confirm the replacement material identity, and collect the sub-supplier evidence behind it [1]. Narrowing the retest to a single previously failed analyte while the replacement material itself is unverified simply moves the risk to the next line of the report.
For marking and declaration failures, apply the discipline familiar from conformity marking practice, where every required element must be present, correctly stated, and durable on the actual product and packaging [2]. Review corrected production cartons rather than artwork proofs, because proofs pass easily while worn plates and wrong label stock fail quietly on the line.
Buyers sourcing under time pressure sometimes arrange PPWR packaging compliance in ChinaPPWR packaging compliance in China retest capacity before the corrective action is even confirmed, which is sensible planning as long as the lab does not start until the factory evidences the fix. Booking the slot early saves the season; starting the test early wastes the fee.
A closed failure file contains the original report, the hold note, the root-cause record, the written corrective action with cost responsibility, the retest sampling record, the new report, and the shipping release. Assemble it as the work happens. Reconstructing it months later for a customer audit takes ten times longer and convinces nobody.
Sources
- Wikipedia: Restriction of Hazardous Substances Directive —— Overview of the RoHS directive restricting hazardous substances in electrical and electronic equipment.
- Wikipedia: CE marking —— Overview of CE marking as conformity marking for products sold in the European Economic Area.
Frequently asked questions
The factory blames the lab and wants a different lab for the retest. Should we agree?
Challenge the claim first by asking what specifically was wrong with the method or the sampling. Genuine lab errors happen but are far rarer than material substitutions. If a second lab is used, keep the same scope and criteria so the verdicts are comparable, and keep the first report in the file rather than discarding it.
Can we ship the pallets that look unaffected while the retest runs?
Only if the unaffected portion is positively identified, segregated, and separately verified against the same criteria. Appearance is not identification. When the failure could be systemic, such as a shared ink or board grade, partial shipment is a gamble with the customer relationship.
Who normally pays for the retest?
That should have been agreed in the corrective-action note before the retest started. Common practice places the cost on the party responsible for the root cause, which is usually the factory for material substitutions and artwork errors. Whatever the split, write it down before the lab begins so the invoice does not become a second dispute.
The retest passed but only just. Is that good enough?
A borderline pass on corrected goods calls for strengthened process controls before the next order, not quiet relief. Ask the factory to lock the material grade and supplier, tighten incoming checks, and accept stricter sampling next time. Record the conditions so the next lot does not drift back over the line.